MAINTENANCE
DESCRIPTION OF SYMBOLS
TROUBLESHOOTING
SPARE PARTS
• After each use, blow air through the tool housing to ensure it is free from all dust,
dirt, etc. Build up of dust, dirt particles may cause the tool to overheat and shorten
the life of the tool.
• If the housing of the fan requires cleaning, do not use solvents but a moist soft cloth
or soft brush only.
• Never let any liquid get inside the tool, never immerse any part of the tool into liquid.
• When not in use, the fan should be stored in a dry, frost free location not within the
reach of children.
WARNING!
ALWAYS ENSURE THE TOOL HAS
COMPLETELY STOPPED AND THE BATTERY IS
REMOVED PRIOR TO ANY MAINTENANCE.
LED lights do not illuminate on charger
Check the charging adaptor is securely plugged into the wall out let.
Check the battery is firmly connected to the charging cradle.
Check that the charging jack is securely connected to the charging cradle.
The fan did not shut-off after the delay time
The correct delay setting may not have been selected. Ensure the light that corresponds
to the desired time is illuminated when selecting an automatic shut-off time.
Note: Ozito Industries will not be responsible for any damage or injuries caused by
the repair of the fan by an unauthorised person or by mishandling of the fan.
Warning
Read instruction manual
mA
Milliamperes
Recycle battery
Do not put in the rubbish
Polarity
Do not incinerate
Do not get battery wet
Thermal cut-out protection
Double insulated
Ah
Amp hour
Indoor use only
Lithium Ion battery
Do not use or store battery in
temperatures exceeding 50
º
C
n
o
No load speed
V
Volts
Hz
Hertz
ac/~
Alternating current
Direct current
dc/
Do not expose to rain.
Do not touch fan blades
Do not operate near long hair
Spare parts can be ordered from the Special Orders Desk at your local
Bunnings Warehouse or Homebase store.
For further information, or any parts visit
www.ozito-diy.co.uk or contact Ozito Customer Service:
Great Britain: 0151 294 4488
Ireland: 1850 882711
E-mail: [email protected]
