ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
1 Align the hole in the dust
container with the outlet
and push in until it clicks
into place.
1 With the dust container
removed, slide the dust
extraction adaptor onto the
outlet with the cutout facing
down.
1 Align the sandpaper with the pad starting from the tip and
press on.
2 Replace the sandpaper once it is worn.
2 To remove, simply
pull the dust
container away from
the sander.
2 A dust extrator pipe can then be connected to the apator.
Attaching the Sandpaper
Fitting and Removing the Dust Container
Fitting the Dust Extraction Adaptor
WARNING!
ENSURE thE tOOL IS SWItChED OFF AND
DISCONNECtED FROM thE pOWER SUppLy bEFORE
pERFORMING ANy OF thE FOLLOWING tASkS.
CORDLESS DEtAIL SANDER
1 2
3 4 5
1 Hook & Loop Pad
2 On/Off Switch
3 Sure Grip Handle
4 Battery Seating
5 Dust Container
ACCESSORIES
6 7
6 Dust Extraction Adaptor
7 Sandpaper
bAttERy & ChARGER (sold separately)
Compatible chargers
Eco charger
PXCSCH-120
“
“
PXCG-120
Fast charger
PXCFCH-030
“
“
PXCG-030
Compatible battery packs
1.5Ah PXCBAT-015
“
PXBP-150
3.0Ah PXCBAT-030
“
PXBP-300
5.2Ah PXCBAT-052
“
PXBP-520