CARING FOR THE ENVIRONMENT
TROUBLESHOOTING
Power tools that are no longer usable should not be disposed of with household
waste but in an environmentally friendly way. Please recycle where facilities exist.
Check with your local council authority for recycling advice.
Recycling packaging reduces the need for landfill and raw materials. Reuse of
recycled material decreases pollution in the environment. Please recycle packaging
where facilities exist. Check with your local council authority for recycling advice.
Spare parts can be ordered from the Special Orders
Desk at your local Bunnings Warehouse.
For further information, or any parts not listed here,
visit www.ozito.com.au or contact Ozito Customer
Service:
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: [email protected]
SPARE PARTS
• Keep air intake clean and air vents free of debris to avoid overheating the motor.
• Do not use cleaning agents to clean the plastic parts of the tool.
A mild detergent on a damp cloth is recommended. Water must never come into contact with
the tool.
• If the vacuum vibrates abnormally, stop motor immediately. Abnormal vibration usually
indicates a mechanical problem continued operation could lead to injury or damage.
WARNING!
ALWAYS ENSURE THE TOOL HAS
COMPLETELY STOPPED AND THE BATTERY IS
REMOVED PRIOR TO ANY MAINTENANCE.
Problem Cause
Remedy
Vacuum is not
starting
Battery is low in charge
Charge battery
Battery not inserted
properly
Insert battery pack correctly
Possible clogging
Clean the dust canister and filter cartridge.
Vacuum is not
operating at
full capacity
Possible clogging
Clean the dust canister and filter cartridge.
Motor
stops while
vacuuming
Battery has no power
Charge battery
Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the
vacuum by an unauthorised person or by mishandling of the vacuum. This tool is designed for DIY
use - use in commercial or industrial environments will void the warranty.
DESCRIPTION OF SYMBOLS
MAINTENANCE
Read instruction manual
Do not use in the rain or leave the blower outdoors while raining.
Wear eye and ear protection.
For best performance, empty the dust canister and clean the filter after each
use.
2 Remove the dust canister by
pulling the top of the container
away from the vacuum
housing.
1 Press and hold the dust
canister release button.
3 Pull the filter cartridge out
from the dust canister. Empty
the debris into a bin and rinse
the filter with cold water and
allow to air dry.
4 Place the filter back into the
dust canister, then refit the
dust canister by first placing
the lower edge onto the
locating recess and then push
the top in until it clicks into
place.
Cleaning the Filter Cartridge
