PXGTPS-0182
3. PUMP SETTING SWITCH
4. PRIMING AND OPERATING THE PUMP
OPERATION
Priming the pump is required to purge air from the hose
Don’t operate the pump without being primed.
WARNING!:
THE PUMP SHOULD BE FILLED
WITH WATER AFTER EACH NEW CONNECTION
OR IF WATER LOSS OR AIR INTAKE HAS
OCCURRED. EXTENDED OPERATION WITHOUT A
WATER REFILL WILL DAMAGE THE PUMP!
On/Off/Pump Switch
Switch position “O”: Off
Switch position “I”: Pump
setting 1, ECO
Switch position “II”: Pump
setting 2, BOOST
- Pump Setting 1
Max. Flow rate: 3000 l/h
Max. Delivery height: 17m
Max. Suction height: 8m
Max. Delivery pressure: 1.7 bar
- Pump Setting 2
Max. Flow rate: 3000 l/h
Max. Delivery height: 26m
Max. Suction height: 8m
Max. Delivery pressure: 2.6 bar
Note:
Selecting pump setting 2 increases the maximum delivery pressure,
but it reduces the maximum operating time of the battery as a result.
1. Ensure the pump setting switch is in the off (0) position and the pump is
positioned on a horizontal, level surface.
2. Remove the priming plug
from the top of the pump
housing by turning anti
clockwise.
3. Fill the pump completely
with clean water. Ensure the
pump and suction inlet pipe
or hose are full. Replace the
priming plug.
WARNING!:
THIS PRODUCT IS INTENDED
FOR PUMPING WATER IN A HOME DOMESTIC
APPLICATION. DO NOT USE IT FOR CORROSIVE,
ABRASIVE, EXPLOSIVE OR DANGEROUS LIQUIDS.
4. The intake process starts automatically after you have pressed the pump
setting switch.
This garden transfer pump is designed for pumping clean water for irrigation
and watering landscape areas, vegetable beds and gardens. It is ideal for
operating lawn sprinklers.
Note:
When the pump is fully primed and air is flushed out , the pump is
ready to operate. The pump may take several minutes to fully prime air from
inside the pump and inlet pipe or hose.
WARNING!:
ENSURE THE OUTLET FOR THIS
PUMP, INCLUDING ANY HOSES OR PIPES ARE
NOT RESTRICTED OR OBSTRUCTED IN ANYWAY.
TAPS, VALVES AND ANY TYPE OF TRIGGER NOZZLE
MUST NEVER BE USED WITH THIS PUMP. FAILURE
TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN
PUMP FAILURE OR SERIOUS INJURY
5. Switch the pump off again after use by pressing the pump setting switch.
Note:
IPX4 - pump can handle splashing of water with no harmful effect.