Turning The Glue Gun On/Off
1. Press the on/off button. The
status indicator light will light up
red whilst the unit is heating up.
2. After 120s the status indicator
light will turn green. The glue
gun is now ready for use.
3. To turn the glue gun off, press the on/off button.
Note:
The glue gun will automatically turn off after 5 minutes of
inactivity.
LED Worklight
The LED worklight will come
on automatically when the tool
is switched on. To toggle the
worklight on and off, press and hold
the on/off button for 3 seconds
while the tool is switched on.
‘
Flow Control Trigger
The flow rate of the glue is dependent on how much pressure is applied to
the flow control trigger.
1. Squeeze the flow control trigger
to release the glue.
2. To stop the flow of glue from
the gun, release the flow control
trigger.
Applying Glue
1. Turn the glue gun on and allow the tool to heat up.
2. Hold the nozzle against the surface to be glued and press the flow control
trigger to deposit some glue.
Note:
Ensure the glue sticks are heated fully to allow an even flow of
glue.
3. Press both workpiece surfaces together immediately and apply pressure.
Hold for 30 seconds to allow the glue to set.
WARNING!
THIS GLUE GUN MUST BE PLACED
UPRIGHT ON ITS BATTERY WHEN NOT IN USE.
WARNING!
GLUE STAINS ON TEXTILES CANNOT
BE REMOVED. WEAR APPROPRIATE PERSONAL
PROTECTIVE EQUIPMENT AND WORK CLOTHES.
PXGGS-011
4. CONTROLS
5. GLUING
OPERATION
3 seconds
WARNING!
THE GLUE GUN HOUSING BETWEEN THE
NOZZLE AND HANDLE MAY BECOME HOT DURING
USE. THIS IS PERFECTLY NORMAL, HOWEVER
AVOID PROLONGED CONTACT WITH THE AREA
UNTIL THE GLUE GUN HAS COOLED DOWN.
WARNING!
THE GLUE GUN WILL REMAIN HOT FOR
A FEW MINUTES AFTER USE. DO NOT STORE THE
GLUE GUN DIRECTLY AFTER USE; ALLOW IT TO
COOL AND THE GLUE STICK TO SOLIDIFY BEFORE
STORING.
