1. Lift up the catcher flap with one
hand and guide the catcher with
your other hand over the two
hooks on the mower housing.
3. To remove, raise the flap and lift
the catcher out.
2. Lower the grass catcher and
allow it to sit in place. Lower the
catcher flap.
Fitting and Removing the Grass Catcher
WARNING!
WHEN FITTING THE GRASS CATCHER
AFTER EMPTYING, ALWAYS ENSURE THERE IS NO
BUILD UP OF GRASS IN THE GRASS CHUTE.
IMPORTANT!
ONLY FIT AND REMOVE THE CATCHER
WHEN THE MOWER IS SWITCHED OFF AND THE
MOTOR HAS COME TO A STOP.
1. Locate cord on outside of handle. Push the supplied cord clip over the cord
and onto the lower handle to secure in place.
If the indicator flap is down while
operating then the grass catcher is full
and needs emptying.
Note:
Care should be taken not to impinge cord when folding down the
handle.
Securing the Cord
Grass Catcher Indicator
Ensure the cord follows the handle smoothly from the switch to the body of
the mower.
The grass catcher is fitted with an indicator flap at the rear of the catcher to
help identify when to empty.
