4. INFLATING OBJECTS
5. TROUBLESHOOTING
PXHPCS-018
WARNING!
DO NOT INFLATE THE OBJECT ABOVE
THE RECOMMENDED INFLATION PRESSURE. THIS
MAY LEAD TO DAMAGE AND/OR INJURIES.
WARNING!
MAINTAIN A FIRM HOLD ON THE AIR
HOSE VALVE OR ENSURE THAT THE NOZZLE/VALVE
IS SECURELY ATTACHED, OTHERWISE THE HOSE
MAY BLOW OUT AND WHIP ABOUT.
Preset Inflation
The inflator can be used to inflate high pressure items such as car and bike
tyres or sporting equipment.
1. Attach the required inflation adaptor to the
high pressure hose and secure using the
locking lever.
2. Insert / attach the hose adaptor to the item
to be inflated.
3. Adjust the target pressure using the “+”
and “-” pressure adjustment buttons.
Note:
The required pressure should be
written on the item.
4. Press the manual/auto trigger to the
‘AUTO’ position to start inflating.
5. Once the preset pressure is reached, the
tool will automatically shut-off.
Note:
For sporting equipment due to the small size and low pressure, the
inflator may automatically cut-off prior to reaching the desired pressure. In
this case, cycle the unit on and off until the required pressure is reached or
top it off with the manual mode.
Manual Mode
Manual mode is handy for short burst of inflation pressure and can be used
for topping up or making slight adjustments to the inflated pressure.
1. Attach the required inflation adaptor to the
high pressure hose and secure using the
locking lever.
2. Insert / attach the hose adaptor to the item
to be inflated.
3. Press and hold the manual/auto trigger to
the ‘MANUAL’ position to start inflating.
Release the trigger to stop inflating.
PSI
KPA
BAR
-
+
BAR
MANUAL
AUTO
MANUAL
AUTO
HOLD
Problem Cause
Remedy
Inflator is
not starting
Battery is low on
charge
Charge battery
Battery not connected
properly
Ensure battery is inserted correctly
Preset pressure is too
low
Set a higher pressure
Motor
stops while
inflating
Battery has no power
Charge battery
High pressure item
has reached preset
pressure.
The inflator will automatically
shut-off when the high pressure
item reaches the preset pressure.
The digital
display is
not working
Power not connected
properly
Ensure the power supply is
connected and the operating mode
switch is in the correct position
