background image

BATTERY CHARGE INDICATOR

The purchased battery is equipped with a 
battery charge indicator to show the state of 
the battery charge.
Press the charge indicator button and look to 
see which LED lights.

Battery requires 
immediate charging

Low state of charge, requires charging soon.

Mid state of charge

Full state of charge.

Note:

 The battery needs to be removed from the tool to check the state of charge. 

BATTERY PROTECTION SYSTEM

The tool is equipped with a battery protection system, which helps to ensure longevity 
of the battery.
The output power automatically cuts off during operation when the tool and/or battery 
are placed under the following situations: 
•   When the tool is overloaded:    
   If this occurs, release the trigger switch and remove causes of overload, then pull 

the switch trigger again to restart. 

•   When the remaining battery capacity becomes low: 
  Recharge the battery pack.

Note:

 

 The battery protection system does not in any way damage the tool.

Note:

  

The indicated capacity may be lower than the actual level during use or 
immediately after using the tool.

WARRANTY

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU 

MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS 

WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO 

RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE 

OUR CUSTOMER SERVICE HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL 

NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER 

SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND 

ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE 

WARRANTY POLICY OR PROCEDURE.

The benefits provided under this warranty are in addition to other rights and 

remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are 

entitled to a replacement or refund for a major failure and for compensation 

for any other reasonably foreseeable loss or damage. You are also entitled to 

have the goods repaired or replaced if the goods fail to be of acceptable 

quality and the failure does not amount to a major failure. 
Generally you will be responsible for all costs associated with a claim under 

this warranty, however, where you have suffered any additional direct loss as 

a result of a defective product you may be able to claim such expenses by 

contacting our customer service helpline above.

36 MONTH REPLACEMENT WARRANTY

Your product is guaranteed for a period of 

36 months from the original date 

of purchase

 and is intended for DIY (Do It Yourself) use only. If a product is 

defective it will be replaced in accordance with the terms of this warranty. 

Warranty excludes consumable parts.

WARNING

The following actions will result in the warranty being void.

•   If the tool has been operated on a supply voltage other than that specified 

on the tool.

•   If the tool shows signs of damage or defects caused by or resulting from 

abuse, accidents or alterations.

•   Failure to perform maintenance as set out within the instruction manual.
•   If the tool is disassembled or tampered with in any way.

OZITO

 

Australia/New Zealand (Head Office) 

25 Fox Drive, Dandenong South, Victoria, Australia 3175.

ONLINE MANUAL

Scan this QR Code with your 

mobile device to take you to the 

online manual.

PXBP-250

1.  OPERATION

CHARGING YOUR LITHIUM ION BATTERY

This battery has been shipped in a low charge condition, and requires charging prior to 
use. Allow several cycles of charging and discharging (through use with a compatible 
tool) for the battery to reach its optimum performance / runtime.

Only use the battery pack with Ozito Power X Change 18V cordless products.

This battery is compatible with chargers from the 18V Ozito Power X Change range 
available through your local Bunnings Warehouse. Product availability may differ.

1. 

Insert the power plug of the charger into the mains socket outlet. The green LED 

will begin to flash when properly connected to power supply.

2. 

Insert the battery pack into the battery charger .

3. 

Remove battery from the charger once fully charged. Disconnect the charger from 

the power supply.

Note:

 

The battery pack can become a little warm during the charging. This is normal.

If the battery pack fails to charge, check:

 

if there is voltage at the socket outlet

 

that the battery and charger are properly connected.

If the battery pack still fails to charge, please contact our customer service center.

1220

WARNING! 

DO NOT COVER OR PLACE ANY OBJECT ON 

TOP OF THE CHARGER; PLACE THE CHARGER AWAY 
FROM HEAT SOURCES.

Summary of Contents for PXC PXBHS-180













Reviews: