5. STARTING
6. SPRAYING
1. Set the engine on/off
switch to the ON (I)
position.
2. Set the fuel valve to
ON.
I O
ON
I O
3. Set choke to CLOSE
position.
4. Set to full throttle.
HALF
THROTTLE
I
O
I
O
5. Pull the recoil starter
slowly until some
resistance is felt.
I
O
I
O
HALF
THROTTLE
6. Then pull the recoil starter
firmly several times until the
engine starts.
7. Set choke to OPEN
position.
I
O
1. Ensure the throttle
lever is fully to the left
to achieve maximum
pressure.
3. Squeeze trigger to
begin spraying.
I
O
2. Ensure trigger is not
locked off.
4. When finished, set on/
off switch to OFF to
stop the pump.
I
O
5. Set the fuel valve to
OFF.
7. The pump has a pressure relief
valve which will release a small
amount of water in the event of
overheating.
I
O
OFF
NOTE:
DO NOT RUN FOR LONGER THAN 5 MINS
WITHOUT CIRCULATING WATER THROUGH THE
PUMP AS THIS COULD LEAD TO OVERHEATING AND
DAMAGE.
6. Release built up water
pressure by squeezing
the trigger.
WARNING:
THE LANCE AND GUN WILL KICK BACK
WHEN THE TRIGGER IS FIRST PULLED.
1
PWB-2200
FULL
THROTTLE
