• Keep the vents of the spray gun clean at all times. If possible,
prevent foreign matter from entering the vents.
• If the body of the spray gun requires cleaning, do not use
solvents but a moist soft cloth only. Never let any liquid get
inside the gun body; never immerse any part of the spray gun
into a liquid.
Note: Ozito Industries will not be responsible for any damage or
injuries
caused by the repair of the sander by an unauthorised person
or by mishandling of the spray gun.
MAINTENANCE
WARNING!
ENSURE THE TOOL IS DISCONNECTED FROM THE
POWER SUPPLY BEFORE PERFORMING ANY OF THE FOLLOWING
OPERATIONS.
1 Unscrew the paint pot and
return remaining material
into a container.
1 Unscrew the air cap nut
to remove the air cap and
nozzle.
4 Remove the paint head
from the body and
dismantle the paint pot and
suction tube.
3 Unlock the locking lever
and rotate the paint head
anti-clockwise until the
arrows on the neck of the
paint head and body align.
6 Take note of the holes on the air cap and nozzle, if blocked
clean using the provided cleaning needle.
3 Clean the paint pot and
suction tube with a brush
and then screw the pot
back into the gun.
5 Remove the paint pot and empty any remaining solvent.
After each use it is essential that the spray gun is cleaned
thoroughly. This will prevent any blockages occurring and
provide reliable performance when you next come to use it.
2 Fill the paint pot with
solvent or water.
Note: Use
only non-flammable liquids
2 Insert the fluid needle
removal tool over the fluid
needle. Rotate 90 degrees
and then pull firmly to
remove the needle.
5 Dip a cloth in solvent or water and clean the air cap, nozzle,
rear of the paint head and suction tube.
7 Prior to storing the spray gun, ensure it is completely dry.
4 Plug the gun back in and
spray the solvent into a
container. Repeat until
clear solvent comes out.
Cleaning
Cleaning Parts
a
b