1
3. CONTROLS
OPERATION
1 Squeeze the on/off trigger
to start spraying.
1 Squeeze the trigger
while aiming at a piece of
cardboard or scrap.
1 Remove the filter cover by
pressing the tabs at the top
and bottom of the cover.
1 Insert one end of the
shoulder strap through
the gap at the front of the
spray station.
3 Repeat this process to
attach the shoulder strap
to the bracket at the rear of
the spray station.
The shoulder strap can be fitted to the spray station to help
carry or transport the unit.
3 Push the filter cover back onto the spray station to secure the
filter.
The regulator dial is a stop that limits the distance the trigger
can be pressed. This results in less material being sprayed.
2 Release the on/off trigger
to stop spraying.
2 Rotate the regulator dial
to the required position for
optimal results.
2 Wash or replace the dirty
filter and place inside the
inner cover.
2 Thread the end of the strap
back through the buckle
underneath the already
threaded strap.
On/Off Trigger
Spray Regulator Dial
Replacing Air Filter
Shoulder Strap
CAUTION:
TO REDUCE THE RISK OF ELECTRICAL SHOCK,
A RESIDUAL CURRENT DEVICE (RATED 30MA OR LESS)
MUST BE USED.
a
a
b
WARNING!
NEVER OPERATE THE SPRAY GUN WITHOUT
A FILTER. DIRT COULD BE SUCKED IN AND DAMAGE THE
OPERATION OF THE UNIT.
On/Off Switch
1 To turn the unit on press
the on/off switch into the on
position (I).
2 To turn the unit off press
the on/off switch into the off
position (0).
