ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1. Insert the Nitto Style
Connector into the quick-
lock coupling of the air
hose.
1. Blast Gun Storage Hook
2. Media Filling Hole
3. Carry Handle
4. Ceramic Nozzle (4mm fitted)
5. Blast Gun
6. Hose Storage Hook
7. Delivery Hose
8. Bleeder Valve
9. Trigger
10. 1/4” Nitto Style Connector
PORTABLE SANDBLASTER
ACCESSORIES:
KNOW YOUR PRODUCT
1
2
3
4
5
6
8
7
9 10
11
1. AIR SUPPLY
SETUP & PREPARATION
Connecting the air hose from the Compressor (not included)
11. Ceramic Nozzles (5, 6, 7mm)
IMPORTANT!:
BEFORE CONNECTING OR DISCONNECTING
COMPRESSOR AIR HOSE, ALWAYS MAKE SURE THAT THE
COMPRESSOR IS OFF.
Note:
An oiler system on the compressor should not be used with
this sandblaster. The oil will mix with the abrasive media
being propelled, causing poor gun performance.
2. The quick-lock sleeve
will spring forward
automatically, connecting
the Blast Gun.
The air hose must be long enough to reach the work area with
enough extra length to allow free movement while working.
Air Compressor (not included)
Use a suitable air compressor that delivers 70-100 litres a minute
and provides 50-120 psi.
