![background image](http://html.mh-extra.com/html/ozito/prr-1200/prr-1200_operation-manual_1666606009.webp)
9
ASSEMBLY (cont.)
2. Depress and hold the spindle lock button (14) to stop
the spindle from turning.
3. Whilst holding the spindle lock button (14), loosen the
collet nut (15) by rotating it clockwise using the
spanner (11) provided.
4. Remove the collet nut (15), followed by the collet (Fig.3).
5. Install the new collet into the assembly.
6. Install the collet nut (15) and tighten by hand, turning
anti-clockwise.
Warning!
Do not tighten the collet nut without a bit in
place or you may break the collet.
Installing and Removing Router Bits
1. Ensure the correct collet size diameter is installed for
the router bit shaft diameter you are using.
2. Loosen the collet nut (15) by depressing and holding
the spindle lock button (14) and then rotating the
collet nut (15) clockwise (Fig.4).
3. Insert a router bit into the collet, ensuring that the
shaft of the bit is inserted all the way into the collet
and then raise the bit approx 2mm (Fig.5).
4. Tighten the collet nut (5) by depressing and holding
the spindle lock button (14) and then tightening the
collet nut (15) anti-clockwise (Fig.6).
CAUTION:
Ensure the bit is firmly secured before
commencing operation.
Fig. 2
Fig. 3
Fig.
4
Fig. 5
Fig. 6
Summary of Contents for PRR-1200
Page 1: ......