![background image](http://html.mh-extra.com/html/ozito/prg-621v/prg-621v_operating-instructions-manual_1666605010.webp)
!
10
Hints for Optimum Use
•
When working on outside edges, move the tool counter clockwise.
When working on inside edges, move the tool clockwise.
•
You can use the tool without a guide. This is useful for signwriting and creative
work. Only make shallow cuts.
Your Ozito Router has been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation depends upon proper
tool care and regular cleaning.
Before performing any maintenance, switch off and unplug the tool.
•
Regularly clean the ventilation slots on your router using a soft brush or dry cloth.
•
After each use, blow air through the router to ensure it is free from all dust
particles that may build up. Build up of dust particles may cause the tool to
overheat and fail.
•
Regularly clean the motor housing using a damp cloth. Do not use any abrasive
or solvent-based cleaner.
•
When the carbon brushes wear out the tool will spark and/or stop. This
situation can damage your tool so to avoid this happening the brushes should
be replaced prior to wearing out fully. Brushes will wear out after many uses
but before they do take the tool to an Authorised Ozito Service Agent for quick
and low cost replacement.
Note:
Ozito Industries will not be held responsible for any damage or injuries
caused by the repair of the tool by an unauthorised person or by mishandling of
the tool.
OPERATION (cont.)
MAINTENANCE
PRG-621V manual 23/3/04 5:40 PM Page 10