background image

size 148 x 210 mm

Danger! - Read the operating instructions to re-

duce the risk of inquiry

Store the battery only in dry rooms with an am-

bient temperature of +10°C to +40°C. Place only 

charged batteries in storage (charged at least 

40%). (not included in delivery)

The reprinting or reproduction by any other me-

ans, in whole or in part, of documentation and 

papers accompanying products is permitted only 

with the express consent of the iSC GmbH. 

Subject to technical changes

Danger!

The equipment and packaging material are 

not toys. Do not let children play with plastic 

bags, foils or small parts. There is a danger of 

swallowing or suffocating!

This consignment contains lithium-ion batteries.

In accordance with special provision 188 this 

consignment is not subject to the ADR regula-

tions. Handle with care. Danger of ignition in case 

of damage to the consignment package. If the 

consignment package is damaged: Check and 

if necessary repackage. For further information 

contact: 0049 1807 10 20 20 66 (fixed network 

14 ct/min, mobile phone max. 42 ct/min) Outside 

Germany charges will apply instead for a regular 

call to a landline number in Germany.

PXBP-400U

GB

  Additonal operating & safety instructions Power X Change Battery

Summary of Contents for Power Xchange PXDDGK-600U

































Reviews: