ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
16. Safety Key
1. Upper Handle
2. Lock-off Button
3. Handle Securing Set
4. Handle Extension
5. Lower Handle
6. Battery Cover
7. Ejector Flap
8. Roller
9. Height Adjustment Knob
10. Start/Stop Lever
11. Catcher Strap
12. Grass Catcher
13. Motor Housing
14. Cutting Bar
15. Reel Blades
CORDLESS CYLINDER MOWER
KNOW YOUR PRODUCT
1
9
2
10
3
11
4
12
5
6
7
8
1. ASSEMBLY
SETUP & PREPARATION
1. Place the handle extensions
which there is only one hole,
to the upper end of the lower
handle. From the securing set,
fit the bolts through outside
and secure in place with
handle securing knobs.
Assembling the Handles
WARNING!
ENSURE THE TOOL IS SWITCHED OFF
AND BATTERIES ARE DISCONNECTED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
ACCESSORIES
15
16
2. Place the upper handle inside
the upper ends of the handle
extensions.
Note:
There are 2 holes
on each end of the handle
extensions, select the
appropriate hole for the height of
the user.
3. Secure with the handle
securing set.
BATTERY & CHARGER
This tool is compatible with all battery and chargers from the Ozito
Power X Change Range.
4. To attached the assembled handle to the mower body, locate the two
metal lugs found behind each wheel. Insert one side of the handle to the
metal lug. Then press the end of the handle together slightly and attached
the other side.
5. To secure the handle
to the mower, insert a
split pin in each hole
on both sides.
13
14