3. INSERTING & REMOvING THE BATTERIES
4. CONTROLS
OPERATION
1. Pull the securing latch forward
and open the battery cover.
1. Press and hold the lock-off
button.
1. Push lever 1 outwards away
from the mower body and hold to
release the lever.
3. Release the start/stop lever to
stop the mower.
To prevent accidental start up, the mower is fitted with a dual action switch.
The height adjustment lever provides 6 cutting heights from 25mm to 75mm.
1. Pull the securing latch forward
and open the battery cover.
3. Insert the safety key.
(If the mower is not going to be used
immediately, do not insert the safety
key.)
2. Press the battery release tab and
remove the batteries.
2. Slide two batteries of the same
capacity and same charge state
into the mower aligning the ribs
so that they click into place.
2. Pull the start/stop lever towards
the handle to start the mower
and then release the lock-off
button.
2. Adjust 2 until the required cutting
height is selected.
4. Close the battery cover.
3. Close the battery cover.
Inserting the Batteries into the Mower
Switching On and Off
Adjusting the Cutting Height
Removing the Batteries from the Mower
CAUTION:
BE CAREFUL DURING CUTTING HEIGHT
ADjUSTMENTS TO PREvENT ENTRAPMENT OF THE
FINGERS BETWEEN MOvING HEIGHT ADjUSTMENT
LEvER AND THE MOWER HOUSING.
PXCLMK-418
3. Release lever 1 and check that it
is securely seated in the required
cutting height.
Note:
Always use 2 batteries of same capacity and same charge state with the mower.
