![background image](http://html1.mh-extra.com/html/ozito/power-x-change-pxbcss-184/power-x-change-pxbcss-184_instruction-manual_1666741003.webp)
Changing The Blade
This tool is for wood cutting only and is not recommended for use with
abrasive wheels or masonry/diamond cutting wheels. Only use Ø184mm
wood cutting blades.
1. Press and hold the spindle lock.
2. Use the hex key to rotate the
blade until the spindle lock
engages. Remove the blade bolt
and outer blade flange.
3. Retract the lower blade guard
fully.
4. Remove and replace the blade.
Ensure that the arrows on the
blade point in the same direction
as the arrow on the upper blade
guard.
5. Replace the outer blade flange and blade bolt.
WARNING!
ONLY USE BLADES WITH THE CORRECT
SIZE AND SHAPE OF BORE HOLE. ONLY USE THE
FLANGE AND BOLT SUPPLIED WITH THE TOOL.
6. Hold down the spindle lock and
tighten the blade bolt with the
hex key.
Depth Adjustment
Depth should be adjusted so that no more than one tooth is protruding
through the timber. This helps to minimise splintering.
1. Loosen the depth adjustment
lever.
Note:
Do not push the lever
behind the depth adjustment scale.
2. Hold the baseplate down with
one hand. Raise or lover the saw
to the desired depth.
3. Tighten the depth adjustment
lever to secure in place.
2. FITTING A BLADE
3. CUTTING ADJUSTMENTS
45°
30°
0
5
10
20
25
30
35
40
45
50
55
60
65
15
15
RIGHT HANDED SAW
THIS SIDE OUT
24
184
MM
TOOTH
Max. Speed 9500rpm
Bore: 20mm
Thickness: 1.6mm
TUNGSTEN
CARBIDE
TEETH
(7¼”)
WARNING!
Do not use tungsten carbide tipped blades for
masonry or metal cutting applications.
0
5
10
20
25
30
35
40
45
50
55
60
65
15
15
RIGHT HANDED SAW
THIS SIDE OUT
24
184
MM
TOOTH
Max. Speed 9500rpm
Bore: 20mm
Thickness: 1.6mm
TUNGSTEN
CARBIDE
TEETH
(7¼”)
WARNING!
Do not use tungsten carbide tipped blades for
masonry or metal cutting applications.
RIGHT HANDED SAW
THIS SIDE OUT
24
184
MM
TOOTH
Max. Speed 9500rpm
Bore: 20mm
Thickness: 1.6mm
TUNGSTEN
CARBIDE
TEETH
(7¼”)
WARNING!
Do not use tungsten carbide tipped blades for
masonry or metal cutting applications.
RIGHT HANDED SA
W
THIS SIDE OUT
2
4
1
8
4
M
M
TOOTH
Max. Speed 9500rpm
Bor
e: 20mm
Thickness: 1.6mm
TUNGSTEN
CARBIDE
TEETH
(7
¼
”)
W
ARNING!
Do not use tungsten carbide tipped blades for
masonry or metal cutting applications.
RIGHT HANDED SAW
THIS SIDE OUT
24
184
MM
TOOTH
Max. Speed 9500rpm
Bore: 20mm
Thickness: 1.6mm
TUNGSTEN
CARBIDE
TEETH
(7¼”)
WARNING!
Do not use tungsten carbide tipped blades for
masonry or metal cutting applications.
WARNING!
ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
WARNING!
INSPECT THE BLADES BEFORE EACH
USE. REPLACE IF DAMAGED.
WARNING!
ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.