background image

1

ONLINE MANUAL

Scan this QR Code with your 

mobile device to take you to 

the online manual.

16
17

To make it easier to control, 

the hedge trimmer is fitted 

with a rotary handle that can 

be adjusted as required into 3 

positions.

1.   To adjust the angle, press the rotary handle 

locking lever downwards. 

2.   Turn the rotary handle into the required position and then allow the 

lever to rise and lock in place again. 

3.   The various adjustable positions facilitate working above head height 

or in other places with difficult access.

KNOW YOUR PRODUCT

SETUP & PREPARATION

1  Cutting blade
2  Safety guard
3  Front handle
4  Side cover
5  Recoil starter
6  Rotary handle locking lever
7  On/Off switch 
8  Safety switch
9  Fuel tank

10 Air filter cover

11 Gearbox lubrication nipple
12 Spark plug lead
13 Throttle lever 
14 Rotatable rear handle
15 Fuel tank cap 
16 Choke lever
17 Priming Bulb

1.  ROTATABLE REAR HANDLE

PETROL HEDGE TRIMMER

ACCESSORIES

1

9 10 11

13

12

15

14

2 3

4

18.  

Blade cover

19. Screwdriver 
20.  

8 mm / 10 mm Spanner

21. Fuel mixing bottle 
22. Spark plug wrench

19

20

21

22

18

5 6 7

8

        IMPORTANT:

 THE ROTARY HANDLE FEATURES 

A LOCKOUT SO THE THROTTLE CANNOT BE 

DEPRESSED UNLESS THE HANDLE IS IN ONE OF 

THE SET POSITIONS.. 

Summary of Contents for PHT-550










Reviews: