1
6. Tilt the unit backwards, so that the
blade is clear of the ground.
7. Squeeze the throttle gently. Allow
the engine to run for 60 seconds so
that it warms up.
Stopping
1. When you wish to stop the engine,
first release the throttle so that the
engine is idling and the blade stops
spinning.
2. Press the On/Off switch to the (O)
Off position, as indicated on
the switch.
4. STARTING & STOPPING
OPERATION
Starting
Note:
Do not squeeze the throttle before starting.
1. Press the On/Off switch on the
handle to the On (I) position.
2. Press the primer bulb until full of
fuel
.
3. Push the choke lever up to the start
position.
Note.
Pressing the primer bulb and
setting the choke to the start position is
unnecessary if the engine is warm
Start position
.
4. Pull the recoil starter until the
engine starts.
5. Push the choke lever down
to the run position. Restart
i
if the motor stops.
WARNING!:
THE LAWN EDGER RUNS FOR A FEW
SECONDS AFTER IT HAS BEEN SWITCHED OFF.
LET THE MOTOR COME TO A COMPLETE STANDSTILL
BEFORE SETTING THE TOOL DOWN.
