1
4. ADJUSTING THE SPEED
2 Ensure the choke lever is in
the open position “
“.
2 Set the on/off switch to the off
position “o“.
Note:
If the engine does not start up even after several attempts,
follow the steps in “Cold Starting”.
x10
1 Set the blower on a
hard, level surface
and the on/off switch
to the On position “
“.
1 To increase the
speed of the blower,
squeeze the throttle
trigger.
1 To increase the set
speed of the blower,
rotate the throttle
lever forward.
2 To decrease the
speed of the blower,
release the throttle
trigger.
2 To decrease the set
speed of the blower,
rotate the throttle
lever backward.
The blower has 2 speed adjustments, the throttle trigger allows fast
speeds changes whereas the throttle lever will maintain a speed once
set.
1 Allow the blower to
slow by releasing the
throttle trigger and
setting the throttle
lever to the slow
position.
4 Hold the blower
firmly and pull out
the recoil starter until
you feel resistance.
Pull firmly on the
recoil starter until the
engine starts.
x10
INCREASE
SPEED
DECREASE
SPEED
INCREASE
SPEED
DECREASE
SPEED
Warm Starting
Throttle Trigger
Throttle Lever
Stopping the Blower