14
ASSEMBLY (cont.)
1. The engine must be stopped and cool. Place the chainsaw on its side with the
fuel tank cap facing upwards.
2. Make sure that the fuel mixture is well mixed.
3. Remove the fuel tank cap (21).
4. Fill the fuel tank to about 80% of its capacity.
5. Fasten the fuel cap (21) securely and wipe up any fuel spillage around the machine.
Note:
1 litre of 2-stroke fuel = 28.5ml of 2-stroke oil & 971.5ml of unleaded fuel.
5 litres of 2-stroke fuel = 143ml of 2-stroke oil & 4.857L of unleaded fuel.
Adding chain bar oil
Warning!
Never start work unless the chain and bar are lubricated.
1. Place the chainsaw
on its side with the
chain bar oil tank cap
(24) facing up.
Untwist and remove
the chain bar oil tank
cap (24).
2. Fill the tank to 80%
capacity with chain oil.
3. Fasten the chain bar oil tank cap (24) and wipe up any oil spillage.
Starting the chainsaw
Warning!
Do not start the motor whilst the saw hangs from one hand. This is
very dangerous as the chain may come in contact with your body.
1. Fill the fuel and oil tanks respectively and
tighten the caps securely.
2. Set the on/off switch (11) to On (the I
position). Make sure the brake is ON when
starting for safety, by pushing the front
guard (6) forward.
OPERATION
