![background image](http://html.mh-extra.com/html/ozito/ozmps500a/ozmps500a_operating-instructions-manual_1666602004.webp)
4
INTRODUCTION
Congratulations on purchasing the Ozito Multi Purpose Saw.
We aim to provide quality tools at an affordable price. We hope
you will enjoy using this product for many years.
Your Ozito Multi Purpose Saw OZMPS500A has been designed
for cutting various materials such as timber, aluminium, steel
and plastics. It is intended for DIY use only.
Warning!
When using mains-powered equipment, basic safety precautions,
including the following, should always be followed to reduce risk of fire, electric
shock, personal injury and material damage.
Read and understand the complete manual prior to operating this tool.
Save these instructions and other documents supplied with this machine for
future reference.
The electric motor has been designed for 230-240V only. Always check that the power
supply corresponds to the voltage on the rating plate.
Note:
The supply of 230V and 240V on Ozito tools are interchangeable for Australia
and New Zealand.
This tool is double insulated in accordance with AS/NZS 3160: 1996; therefore
no earth wire is required.
If the supply cord is damaged, it must be replaced by an electrician or a power tool
repairer in order to avoid a hazard.
Note:
Double insulation does not take the place of normal safety precautions when
operating this tool. The insulation system is for added protection against injury
resulting from a possible electrical insulation failure within the tool.
Using an Extension Lead
Always use an approved extension lead suitable for the power input of this tool. Before
use, inspect the extension lead for signs of damage, wear and ageing. Replace the
extension lead if damaged or defective.
When using an extension lead on a reel, always unwind the lead completely. Use of an
extension lead not suitable for the power input of the tool or which is damaged or
defective may result in a risk of fire and/or electric shock.
SAFETY INSTRUCTIONS
ELECTRICAL SAFETY