9
Turn off the tool and disconnect from the power supply
•
When not in use, the Hedge Trimmer should be stored in a dry, frost free location
not within the reach of children.
•
Keep ventilation slots of the Trimmer clean at all times and prevent any foreign
matter from entering.
•
If the enclosure of the Trimmer requires cleaning do not use solvents but a moist
cloth only.
•
The blade rail should be cleaned and treated with light machine oil or spray
lubricant (such as WD40, CRC 5.56 or RP7) after each use. When a job lasts for a
longer period of time it is recommended that the blade rail also be treated with
spray lubricant at regular intervals during operation.
Note:
Ozito Industries will not be responsible for any damage or injuries caused by
repair of the Trimmer by an unauthorised person or mishandling or mistreatment of
the tool. This tool is designed for DIY use - use in commercial or industrial
environments will void the warranty.
The blades are not covered by warranty - any damage to or sharpening of the blades
is the responsibility of the user. Use of the Hedge Trimmer with blunt blades will place
excessive load on the motor and gearbox. Ozito Industries cannot accept warranty
liability for damage caused by lack of maintenance to the Hedge Trimmer.
MAINTENANCE
DESCRIPTION OF SYMBOLS
Double insulated
V
Voltage
Regulator compliance mark
Hz
Herts
n
o
No load speed
W
Wattage
/min
Revolutions or
reciprocation per minute
Warning
Do not expose to rain
Remove plug from the mains immediately if the cable is
damaged or cut
~
Alternating current