10
MAINTENANCE
1. Ensure that the power is disconnected from the tool and the plug is removed
from the power socket prior to any cleaning or maintenance being carried out
and when replacing faulty parts.
2. Keep the motor housing (1) clean of dust and dirt.
3. Remove dust and dirt from the tool regularly with a soft cloth, brush or
compressed air.
4. Use a mild detergent and a soft cloth to clean plastic parts.
5. If the cordset (7) is damaged, have it replaced by an electrician or a
power tool repairer.
6. Regularly check that all bolts, screws and nuts are securely fixed as these could
work loose during normal operation.
Note:
Ozito Industries will not be responsible for any damage or injuries caused
by the repair of the tool by an unauthorised person or by mishandling of the tool.
V
Volts
Hz
Hertz
~
Alternating current
W
Watts
/min
Revolutions or
reciprocation per minute
Hp
Horse power
Regulator compliance mark
ø
Diameter
CFM
Cubic feet per minute
n
o
No load speed
Do not pick up any burning or
smoldering material like
cigarette ends.
Warning
Read the instruction manual for
fitting instructions.
Do not pick up any burning or
smoldering material like matches.
Do not pick up any glass.
Do not expose to rain or
use in damp conditions.
Do not pick up any water.
Always wear personal protection
such as a dust mask, safety
glasses and ear muffs.
dB
Decibel Rating
DESCRIPTION OF SYMBOLS
