4
Congratulations on purchasing an Ozito Circular Saw. We
aim to provide quality tools at an affordable price. We hope
you will enjoy using this appliance for many years.
Your Ozito Circular Saw OZCS1600WA has been designed
to cut timber and is intended for DIY use only.
Warning!
When using mains-powered tools, basic safety precautions,
including the following, should always be followed to reduce risk of fire,
electric shock, personal injury and material damage.
Read the whole manual carefully and make sure you know how to switch the tool off, in
an emergency, before operating the tool.
Save these instructions and other documents supplied with this machine for future
reference.
The electric motor has been designed for 230V and 240V only. Always check that the
power supply corresponds to the voltage on the rating plate.
This tool is double insulated in accordance with AS/NZS3100; therefore no
earth wire is required.
If the supply cord is damaged, it must be replaced by
an electrician or a
power tool repairer
in order to avoid a hazard.
Note:
Double insulation does not take the place of normal safety precautions when
operating this tool. The insulation system is for added protection against injury
resulting from a possible electrical insulation failure within the tool.
Using an Extension Lead
Always use an approved extension lead suitable for the power input of this tool. Before
use, inspect the extension lead for signs of damage, wear and ageing. Replace the
extension lead if damaged or defective.
When using an extension lead on a reel, always unwind the lead completely. Use of an
extension lead not suitable for the power input of the tool or which is damaged or
defective may result in a risk of fire and electric shock.
It is recommended that the extension lead is a maximum of 25m in length. Do Not use
multiple extension leads.
INTRODUCTION
SAFETY INSTRUCTIONS
ELECTRICAL SAFETY
!!
