TOOL OPERATION (cont.)
Wood Drilling
•
Mark the place where you want to drill with a punch or nail.
•
To avoid splintering on breakthrough either clamp a piece of scrap wood to the
back of the wood or continue the hole from the back of the wood when the drill
bit first breaks through.
Masonry Drilling
•
Mark the place where you want to drill.
•
Only use carbide tipped drill bits.
•
Use the drill only in the forward position.
•
Hold the drill firmly and place the bit at the point to be drilled.
•
Do not force the drill. Allow the drill and the bit to do the work.
•
If the bit jams in the work piece or stalls, stop the tool immediately. Remove the
bit from the work piece and determine the reason for jamming.
•
When not in use, the drill should be stored in a dry, frost free location not within
the reach of children.
•
Keep ventilation slots of the drill clean at all times and prevent any foreign matter
from entering.
•
If the housing of the drill requires cleaning, do not use solvents but a moist soft
cloth only.
•
Blow out the ventilation slots with compressed air periodically .
Note:
Ozito Industries will not be responsible for any damage or injuries caused by
repair of the sander by an unauthorised person or by mishandling of the tool.
10
AUSTRALIA (Head Office)
1-23 Letcon Drive, Bangholme, Victoria, Australia 3175
Telephone:1800 069 486
Website: www.ozito.com.au
Email: [email protected]
1 X OZCD18V2A Cordless Hammer Drill
2 X 18V Battery
1 x 240V Charging Adaptor & Cradle
2 x Double-ended Screwdriver Bit
1 X Instruction Manual
OZITO INDUSTRIES PTY LTD
CONTENTS
MAINTENANCE AND CARE
