6. APPLIANCE CARE
MAINTENANCE
DESCRIPTION OF SYMBOLS
Cleaning
1. We recommend that you clean the appliance immediately after
you use it.
2. Keep the charging port free of dirt and dust as much as
possible. Wipe the equipment with a clean cloth.
3. Clean the tool after each use with a dry cloth. Do not use
cleaning agents or solvents; these may be aggressive to the
plastic parts in the appliance. Ensure that no water can get into
the interior of the appliance.
Storage
Switch off the tool and make sure that it is secured in such a way
that it cannot be started up again by any unauthorised person.
Store the tool in a dry and secured location which is not
accessible to authorized persons.
Note:
Ozito Industries will not be responsible for any damage or
injuries caused by the repair of the tool by an unauthorised person
or by mishandling of the tool.
WARNING!
BEFORE CLEANING THE APPLIANCE OR
CARRYING OUT ANY MAINTENANCE PROCEDURE,
MAKE SURE THAT THE SWITCH IS SET TO THE OFF
POSITION TO PREVENT ACCIDENTAL STARTING.
Warning
Regulatory Compliance Mark
(RCM)
V
Volts
Nm
Newton metres
n
0
/min
No load speed
Revolutions or reciprocations
per minute
Read Instruction Manual
Power tools that are no longer usable should not
be disposed of with household waste but in an
environmentally friendly way. Please recycle where
facilities exist. Check with your local council authority for
recycling advice.
Recycling packaging reduces the need for landfill and raw
materials. Reuse of recycled material decreases pollution
in the environment. Please recycle packaging where
facilities exist. Check with your local council authority for
recycling advice.
CARING FOR THE ENVIRONMENT
SPARE PARTS
Spare parts can be ordered from the Special Orders Desk at your
local Bunnings Warehouse.
For further information, or any parts not listed here, visit
www.ozito.com.au or contact Ozito Customer Service:
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: [email protected]
