Changing Drive Modes
Rotate the collar to
either of the drive
modes.
In manual mode the screwdriver will start working and keep going
when the switch is set to forward or reverse mode.
In Push 2 Go mode, the screwdriver will only start when it is
pushed against a screw head.
Note:
The switch needs to be set to forward or reverse.
Switching The Tool On & Off
1. In Manual mode, push the switch forwards to tighten screws.
2. Push the switch backwards to loosen screws.
3. Set the switch to
the middle position
to switch the
screwdriver off.
Note:
If the screwdriver has cut out during use, the switch needs
to be set to the off position first to restart the tool.
MANU
AL
FWD
REV
OFF
OSDK-536
