MAINTENANCE
• Keep ventilation slots of the trimmer clean at all times. Periodically
clean out the grass from the spindle plate and the rim of the safety
guard to ensure efficient operation at all times.
• After each use, blow air through the tool housing to ensure it is free
from all dust, dirt, etc. Build up of dust, dirt particles may cause the
tool to overheat and shorten the life of the tool.
• If the housing of the grass trimmer requires cleaning, do not use
solvents but a moist soft cloth or soft brush only.
• Never let any liquid get inside the tool, never immerse any part of the
tool into liquid.
• No lubrication is necessary as the tool has sealed bearings.
• When not in use, the grass trimmer should be stored in a dry, frost
free location not within the reach of children.
WARNING!
ALWAYS ENSURE THE TOOL HAS
COMPLETELY STOPPED AND THE BATTERY IS REMOVED
PRIOR TO ANY MAINTENANCE.
Note: Ozito Industries will not be responsible for any damage or injuries caused
by the repair of the grass trimmer by an unauthorised person or by mishandling
of the grass trimmer. This tool is designed for DIY use - use in commercial or
industrial environments will void the warranty.
Problem
Cause
Remedy
Trimmer is not
starting
Possible clogging
Clean the cutter head of any
grass.
Battery is low in charge
Charge battery
Battery not inserted
properly
Insert battery pack correctly
Trimmer is not
operating at
full capacity
Possible clogging
Clean the cutter head of any
grass.
Cutting tall grass at
ground level.
Make several passes from
top down.
Motor stops
while operating
Battery has no power
Charge battery
Grass wraps
around the
shaft and
spindle plate
Cutting tall grass at
ground level.
Make several passes from
top down.
1. Unscrew the countersunk
head screw in the centre
of the spindle plate, rotate
anti-clockwise to remove.
Once removed put aside
for re-assembly.
2. Lift off the spindle plate.
3. Mount and fasten the new
spindle plate.
Replacing the Spindle Plate
TROUBLESHOOTING
