MAINTENANCE
DESCRIPTION OF SYMBOLS
Replacing Worn Probes
If the tips of the probes become worn, they can be replaced with the
spare pair of probes supplied with this unit.
1. Loosen and remove the worn probes
by turning them anti-clockwise.
2. Screw the replacement probes into place.
Note:
To prevent the probes from getting damaged or prematurely
worn, always fit the probe cover onto the unit when not in use.
Cleaning
Clean the appliance regularly with a damp cloth. Do not use cleaning
agents or solvents; these may be aggressive to the plastic parts in
the appliance. Ensure that no water can get into the interior of the
appliance.
Storage
Switch off the tool and store it in a dry location which is not accessible
to unauthorised persons.
Remove the batteries before storage if the tool will not be in use for a
long time.
WARNING!
BEFORE CLEANING YOUR TOOL OR
CARRYING OUT ANY MAINTENANCE PROCEDURE,
MAKE SURE THAT THE POWER SUPPLY HAS BEEN
REMOVED OR DISCONNECTED TO PREVENT
ACCIDENTAL STARTING.
Warning
Regulatory Compliance Mark
(RCM)
V
Volts
°C
°F
Degrees Celsius
%RH
Percentage Relative Humidity
Degrees Fahrenheit
Read Instruction Manual
Power tools that are no longer usable should not be
disposed of with household waste but in an environmentally
friendly way. Please recycle where facilities exist. Check
with your local council authority for recycling advice.
Recycling packaging reduces the need for landfill and raw
materials. Reuse of recycled material decreases pollution in
the environment. Please recycle packaging where facilities
exist. Check with your local council authority for recycling
advice.
CARING FOR THE ENVIRONMENT
SPARE PARTS
Spare parts can be ordered from the Special Orders Desk
at your local Bunnings Warehouse.
For further information, or any parts not listed here, visit
www.ozito.com.au or contact Ozito Customer Service:
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: [email protected]
ON
SET
DIGITAL
MOISTURE METER
