background image

25%

50%

75%

100%

MODE

ERROR

25%

50%

75%

100%

MODE

ERROR

25%

50%

75%

100%

MODE

ERROR

2. SYMBOLS

Battery Status

When illuminated

Battery charging status = 25%

Battery charging status = 50%

Battery charging status = 75%

Battery charging status = 100%

Error LED

When illuminated.

  If the voltage of the battery is less than 3.5V or 

more than 15V. The battery is either unsuitable 

for charging or is defective. It is also possible 

that other battery errors or faults can mean that 

the battery cannot be charged.

  If the terminal clamps are connected to the 

battery terminals with the wrong polarity. The protection against 

swapped poles ensures that the battery and charger do not get 

damaged. Remove the charger from the battery and start the 

charging process from the beginning again.

  If there is a short-circuit between the two terminal clamps (the 

metal parts of the clamps come into contact with each other). 

The protection against short-circuits ensures that the battery 

and charger do not get damaged.

Mode Status

When Illuminated

12V CHARGING = Normal operation.
Charging of a 12V battery (lead acid battery, AGM 
battery and GEL battery). 2A charging current.

12V WINTER MODE =  For batteries with low 

capacity.

Charging of a 12V battery (lead acid battery, AGM 

battery and GEL battery) in winter mode with 

an ambient temperature of – 20°C to +5°C. 2A 

charging current. Do not charge frozen batteries.

MAINTAIN MODE =  Reduced maximum charge 

current.

Charging of a 12V battery (lead acid battery, AGM 

battery and GEL battery) in charge maintain mode.

Battery capacity 3 - 32Ah. 1A max. charging 

current.

Summary of Contents for OCBC-200







Reviews: