OPERATION
2. CONTROLS
3. OPERATING THE MULTIPURPOSE SAW
1. Pull the safety lock-off
switch down and hold.
1. Scroll through the variable
speed dial to select the
appropriate speed for the
material being cut.
1. Securly clamp the workpiece.
3. Apply the saw to the workpiece, guide the blade back and forth in
a sawing motion to complete the cut.
2. Turn the multipurpose saw
on and wait for it to reach full
speed.
NOTE:
ONLY SUPPLY SUFFICIENT PRESSURE TO
ALLOW THE BLADE TO DO THE CUTTING. DO
NOT FORCE THE OPERATION. BLADES COULD BE
DAMAGED IF EXCESSIVE PRESSURE IS APPLIED.
The tool is recommended for use with a residual current
device with a rated residual current of 30mA or less.
On/Off Switch
2. Squeeze the on/off
trigger.
Variable Speed Dial
3. To turn off, release the
on/off trigger.
MSW-3000
