ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1 Bench Mounting Holes
2 On/Off Switch
3 Guide Rails
4 Sharpening Wheel
5 Module Locking Clip
MULTI FUNCTION SHARPENER SIDE VIEW
6 Protective Guard
7 Adjustable Angle Knob
8 Narrow Tool Guide
9 Magnets
10 Knife Sharpening Slot
11 Scissor Sharpening Slot
12 “V” Guide
13 Drill Bit Clamp Assembly
KNOW YOUR PRODUCT
1. CHANGING MODULES
SETUP & PREPARATION
KNIFE & SCISSOR MODULE
CHISEL & BLADE MODULE
DRILL BIT MODULE
CAUTION:
ENSURE THE TOOL IS DISCONNECTED
FROM THE POWER SUPPLY BEFORE PERFORMING
ANY OF THE FOLLOWING OPERATIONS.
It is recommended that the Multi Function Sharpener be bolted to a
secure bench prior to operating.
Removing a Module
Installing a Module
1 Press and hold down the
module locking clip.
1 Align the module with the
guide rails on the front of
the unit.
3 Ensure locking clip is
secure by trying to raise the
module.
Note:
Approximately 3mm
movement is normal
3mm
2 Slide the module
upwards to remove.
2 Slide the module
down over the
sharpening wheel
until it clicks into
place.
