OPERATION (cont.)
Scraping
NOTE: The scraping blade is designed for scraping surfaces and the removal
of soft materials. Ensure you have the correct angle and only apply light
pressure to avoid cutting the surface.
1. In scraping mode the Multi Function Tool can be used to remove materials
such as fabrics, adhesives and vinyls on materials such as wood, plastic,
metal and painted surfaces.
2. Slide the on/off switch (2) forward to the “on” position. Ensure it is not placed
on the workpiece.
3. Select the desired oscillation frequency speed on
the variable speed dial (1) and wait until the
motor reaches its maximum speed.
4. Place the Multi Function Tool on the workpiece.
Ensure you have angled the scraper blade
correctly (Fig. 10).
5. Allow the scraper to do the work and do not
apply heavy pressure on the Multi Function Tool. Heavy pressure can cut into
the surface or overload the Multi Function Tool.
11
Fig. 10
MFR-250 manual.qxd 1/12/11 11:24 AM Page 12
Summary of Contents for MFR-250
Page 1: ......