3. CONTROLS
Torch Light
Digital Display (PSI / BAR / KPa)
Preset Pressure
1 To turn the LED light on, press
the light button in.
1 To switch between the 3
pressure units, press the
pressure units button.
1 Press the increase button to
increase the preset pressure.
2 Press the decrease button to
decrease the preset pressure.
2 To turn the LED light off, press
the light button again.
Note:
The compressor must be connected to the power for the LED
torch to work.
The compressor has a built-in LED torch light for ease of use at night or
in dark areas.
The digital pressure reading can be switched between PSI, BAR and
KPa to match the requirements on the item being inflated.
While a high pressure item is inflating, the current air pressure will be
displayed on the digital display.
A desired pressure can be preset and the compressor will automatically
shut-off once the pressure is obtained. The preset pressure must be set
before starting the tool.
2. SWITCHING ON & OFF
Connecting to a 12V outlet
Switching On and Off
1 Roll out the 12V socket from
the base of the unit.
1 To operate in high pressure
mode, press the on/off switch
forward into mode “I”.
The 2 in 1 Air compressor Inflator features 2 operating modes which are
high pressure inflating or high volume inflating.
High Pressure Mode
allows you to inflate items that require high
pressures such as sporting equipment or car and bike tyres.
High Volume Mode
allows fast inflation for large volume items such as
an air bed or pool toys.
2 Connect the 12V
socket to a 12V DC
outlet which can be
found in your vehicle.
Note:
Check car outlet
for sufficient power of up
to 120W.
2 To operate in high volume
mode, press the on/off switch
backward into mode “II”.
WARNING:
COMPRESSED AIR CAN BE DANGEROUS.
NEVER POINT THE OUTLET NOZZLE TOWARDS ANY
PART OF YOUR BODY OR ANOTHER PERSON.
WARNING:
AVOID INFLATING THE OBJECTS ABOVE
THE RECOMMENDED INFLATION PRESSURE. THIS MAY
LEAD TO DAMAGE AND/OR INJURIES.
