ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
13. Edging Wheel Assembly
Screws x2
14. Guard Assembly Screw x1
1. Turn the trimmer
upside down and
slide the Safety
Guard into the
recess in the line
trimmer housing.
1. Align both halves of the
Edging Wheel with the
recess around the line
trimmer housing.
3. Once secure, check that
the Edging Wheel is free to
rotate.
If not, refit the Edging
Wheel and Safety Guard
ensuring they are in the
correct orientation.
2. Secure in place
with supplied
Guard Assembly
Screw.
2. Secure in place
with the 2 supplied
Edging Wheel
Assembly Screws.
1. Rotating Head Lock Button
2. Telescopic Shaft
3. Telescopic Shaft Lever
4. Adjustable Handle
5. Main Handle
6. On/Off Trigger
7. Safety Guard
8. Cutter Head
9. Edging Wheel
10. Head Angle Lock Button
11. Locking Knob
12. Cord Retainer
LINE TRIMMER
ACCESSORIES:
KNOW YOUR PRODUCT
1 2 3 4 5 6
8
7
9
11
13 14
10
12
1. ASSEMBLY
SETUP & PREPARATION
Fitting the Safety Guard
Fitting the Edging Wheel
WARNING!
ENSURE THE TOOL IS DISCONNECTED FROM
THE POWER SUPPLY BEFORE PERFORMING ANY OF THE
FOLLOWING OPERATIONS.
WARNING!
NEVER USE THE LINE TRIMMER UNLESS THE
SAFETY GUARD IS PROPERLY FITTED AND SECURED.