1 Make a loop with the
extension cord and push it
through the hole under the
on/off trigger.
3 Connect the extension cord
socket to the line trimmer
cord.
1 Align both halves of the
edging wheel with the
recess around the line
trimmer housing.
1 Place the handle between
the bracket so it is
positioned correctly.
3 Once secure, check that
the edging wheel is free to
rotate.
If not, refit the edging
wheel and safety guard
ensuring they are in the
correct orientation.
2 Place the loop onto the
cord retainer and ensure it
is pulled firmly into place.
2 Secure in place
with the 2 supplied
screws (12mm).
2 Insert the supplied bolt and
secure with the locking nut.
Do not overtighten.
3. CORD RETAINER
2. EDGING WHEEL & HANDLE
Fitting the Edging Wheel
Fitting the Auxiliary Handle
CAUTION:
TO AVOID THE EXTENSION CORD FROM
DETACHING; ALWAYS CHECK THAT THE CORD IS ATTACHED
TO THE CORD RETAINER BEFORE USE.
Using the Cord Retainer
