ONLINE MANUAL
Scan this QR Code with
your mobile device to take
you to the online manual.
0
I
8 x NARROW
SANDING BANDS
30 x SANDING DISCS
20 x CUT-OFF WHEELS
FELT TIP
FELT TIP
WITH SHANK
CONE
MANDREL
10 x GRINDING STONES
WHET STONE
LED COLLAR
5 x COLLETS
2 x HSS
CUTTERS
10 x DIAMOND ENGRAVERS
5 x DRILL BITS
2 x STEEL BRUSHES
2 x NYLON
BRUSHES
RUBBER
POLISHING
POINT
CLOTH WHEEL
5 x FELT WHEELS
NARROW
DRUM
MANDREL
WIDE DRUM
MANDREL
2 x SCREW
MANDRELS
8 x WIDE
SANDING BANDS
Battery Charge Indicator
The rotary tool is equipped with a battery status indicator to show
the battery charge state. Press the on/off button and see which LED
lights up to gauge the status.
Full Charge
Mid Charge
Low charge; requires charging soon.
Battery requires immediate charging.
Note:
The battery needs to be removed from the tool to check the
charge state.
Note:
Once connected for charging, the battery status indicator lights
will illuminate red and remain so whilst charging. The green LED will
illumintate when the tool is fully charged.
Charging Using The AC Adaptor
1. Plug one end of the USB cable into
the AC Adaptor and connect the
adaptor into mains power outlet.
2. Plug the other end of the USB cable
directly into the charging input.
Charging Using A USB Outlet
1. Plug the USB cable directly into the charging input.
2. Charge via USB cable to a USB outlet.
1. Charging Input
2. Battery Status Indicator Light
3. On/Off Button
4. Spindle Lock Button
5. Shaft Collar
6. Collet Nut
7. Variable Speed Controls
CORDLESS 3.6 ROTARY TOOL
ACCESSORIES
KNOW YOUR PRODUCT
1. BATTERY & CHARGER
SETUP & PREPARATION
2
3
4
5
1
6
7
WARNING!
THE POWER SUPPLY FOR THIS
CHARGER IS RECOMMENDED FOR USE WITH A
RESIDUAL CURRENT DEVICE (RATED AT 30mA OR
LESS).
