background image

14

Switching on/off

To prevent accidental start up of the motor the mower is fitted with a dual action switch.

Press and hold the lock-off button (14) (Fig. 16). 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Pull the Start/stop lever (1) towards the handle  

and then release the lock-off button (14) (Fig 17). 

 

 

 

 

 

 

 

 

 

 

 

 

 

Release the start/stop lever (1) to stop the mower.

note: 

The mower is fitted with a blade brake, this safety feature stops the blade from 

rotating within a few seconds. 

 

mowing tips

While using your lawn mower always wear substantial footwear and long trousers.
Make sure the lawn is clear of sticks, stones, wire and debris; they could be 

thrown by the blade.
Before using the lawn mower and after any impact, check for signs of wear or 

damage and repair as necessary.
Replace a worn or damaged blade together with the blade bolt to preserve 

balance.

do not overload the mower.

 Mowing long thick grass may cause the motor 

speed to drop; you will hear a change in the motor sound. If the motor speed 

drops you may overload your lawn mower, which may cause damage. When 

mowing in long thick grass first cut with the cutting height set in the highest  

position, this will help reduce the load. ALWAYS HANDLE THE BLADE WITH 

CARE – SHARP EDGES COULD CAUSE SERIOUS INJURY. USE GLOVES.

1.

2.

3.


note: 

There will be a short delay in the motor starting 

after engaging the start/stop lever (1).

Fig. 16

Fig. 17

operation (cont.)

Summary of Contents for LML-036





















Reviews: