LMF-2050
4. APPLICATIONS
Sanding
Sawing
Scraping
1 Ensure the accessory is
secure, and then start the tool
by pushing the on/off switch
forward.
1 Ensure the workpiece is
securely held down.
3 If plunge cutting, use a slight
pendulum motion.
1 Turn the multi function tool
on and select the desired
speed.
2 Place the multi
function tool flat on
the workpiece.
2 Turn the multi function tool
on.
2 Position the tool on the workpiece at an angle of 10
o
-15
o
.
Note:
Do not apply heavy pressure to the tool or tilt the sanding base
as this will wear out the sanding paper and may damage the
sanding pad.
Note:
Allow the scraper to do the work; do not apply heavy pressure to
the multi function tool. This may cause the multi function tool to
overload or cut into the surface of the workpiece.
With the sanding pad and sanding paper attached, the multi function
tool can be used on materials such as wood, plastic and painted
surfaces.
When sawing, the multi function tool can be used on wood, plastics and
sheet metal.
Note:
Ensure blades are not blunt or damaged in any way before
commencing.
When being used as a scraper, the multi function tool can remove
materials such as fabric, adhesives or vinyl, from materials such as
wood, plastic, metal and painted surfaces.
10 - 15º
Changing Sand Paper
1. Align paper to pad and press
firmly to attach.
2. Carefuly peel paper off pad
from on of the corners.
