The laser has 3 operating modes to assist in levelling as shown below.
Note:
The laser will always project a 360
°
line when projecting a
horizontal line.
1 To switch between these
modes, simply press the
on/off operating mode button
until the desired mode is
reached.
4. USING THE MOUNTING STAND
5. OPERATING THE LASER
OPERATION
Switching the Laser On and Off
1 Turn laser on or off by pressing
the on/off button at the top of
the unit.
Note:
Laser can also be turned
on, in auto-levelling mode
by using the auto-levelling
switch.
WARNING!
ENSURE LASER WINDOW IS NOT AT EYE
LEVEL WHEN OPERATING.
Attaching the Laser to the Mounting Stand
Adjusting the Mounting Stand
The magnetic mounting stand allows you to attach the laser to a metal
surface.
1 Screw the laser clockwise onto
the mounting clamp threaded
rod.
1 Rotate the adjustment
dial clockwise to raise the
mounting surface.
2 Place the magnetic
back onto a metal
surface.
Note:
The stand can also
be attached by screwing
the base onto a 1/4” or
1/2” threaded rod.
2 Rotate the adjustment dial anti-
clockwise to lower the mounting
surface.
Laser Operating Mode
Cross Line
(360
°
Horizontal Line)
360
°
Horizontal
Line
Vertical Line
