Ozito LID-3000, Instruction Manual

Page: 3 / 8

2. INSTALLING ACCESSORIES 3. INSTALLING ACCESSORIES CONT.
OPERATION
1. Pull the drive retaining
ring forward.
3. Release the drive
bit retaining ring
then pull on the
bit to ensure it is
firmly in place.
2. Insert the hex shank
of the appropriate
(1/4”) driver bit.
Installing a Hex Drive Socket or Driver Bit
Removing Driver Bit
Caution : Do not handle drill bits or other accessories without
gloves as they are sharp and can become hot after use, potentially
causing personal injury.
a
b
1. Pull the drive retaining ring forward, remove the driving bit and
then release the drive retainng ring.
a
b
Installing a Socket Adaptor
1. Pull the drive retaining
ring forward.
3. Release the drive
bit retaining ring
then pull on the
socket adaptor to
ensure it is firmly
in place.
2. Insert the hex shank of
a 1/4” socket adaptor
into the retaining ring.
4. Insert the square
end of the
required socket
on to the socket
adaptor.
a
b