OPERATION (cont.)
16
Edging Mode
1. Locate the alignment arrows by the head angle
adjustment button (Fig. 13).
2. Whilst firmly holding the telescopic shaft (6) in
one hand, rotate the cutting head (9) 180°
following the green line until the alignment
arrows again line up. (Fig. 14)
Note:
To return to trimming mode rotate the
cutting head (9) in the opposite direction following
the green line until the alignment arrows again
line up.
Caution:
Ensure the cutting head (9) is rotated until both the alignment arrows are
aligned. The cutting head (9) will rotate with little resistance, if you feel firm
resistance you may be rotating the head in the wrong direction.
Switching on
For your safety this Grass Trimmer is designed with a safety lock off mechanism.
This prevents accidental starting.
If you only squeeze the on/off trigger switch (1) the
Grass Trimmer will not start.
To turn the Grass Trimmer on use your thumb to
push the lock off switch (2) forward and whilst
holding the lock-off switch in the forward position
squeeze the on/off trigger switch (1) (Fig. 15).
You can release the pressure on the lock off switch (2)
once the grass trimmer has started.
Switching off
To turn the grass trimmer off, release the on/off trigger switch (1).
Before starting
Before use, check that the Grass Trimmer is in good working order and that the
blades are not cracked or damaged as below:
1. Ensure the on/off trigger switch (1) is in the off position and the battery (14) is
removed from the Grass Trimmer.
2. Examine the general condition of the tool. Inspect the guard, switch, and
battery. Check for loose screws, misalignment, binding of moving parts,
improper mounting, broken parts and any other condition that may affect its
safe operation. If abnormal noise or vibration occurs during operation, turn the
Grass Trimmer off immediately and have the problem corrected by a qualified
repair person.
Fig. 13
Fig. 14
Fig.
15
alignment
arrow
