JSW-4000U
4. CUTTING
5. POCKET CUTTING
2. Insert the correct
blade into the blade
holder with the teeth
facing forward.
3. Mark your cutting
line with a pencil.
4. Start the jigsaw. Allow
it to reach maximum
speed.
5. Place the base on to the workpiece and move forward with light
pressure.
A pocket cut is when you need to cut a hole in the middle of a
workpiece
1. Drill a hole in the
workpiece using a
12mm bit.
2. Pass the blade through the hole and begin the cut.
Tip:
Use light pressure when making curved cuts.
1. If using a vacuum
or extraction device,
first fit the dust
extraction adaptor
to the jigsaw.
