ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
KNOW YOUR PRODUCT
SETUP & PREPARATION
1. BATTERY
Note: On the initial charge, the battery requires 5 hours of charging.
Subsequent charging only requires 3-5 hours. It will take 4-5
charging cycles before the battery reaches optimum charge and run
time.
1 Saw Arm Swivel Button
2 Quick Release Blade Clamp
3 Steel Base
4 Lock-off Button
5 Variable Speed Dial (not shown)
6 On/off Trigger
7 12V Battery
8 Sure Grip Handle
ROTATOR
TM
COMBI SAW
Installing and Removing
Insert the battery into the
combi saw until it clicks into
place.
This tool is recommended for the use with a residual current
device with a rated residual current of 30mA or less.
Charging
Squeeze the sides of the
battery and pull away from the
tool.
9 Charging Adaptor
10 Charging Jack
11 Charging Cradle
12 Bayonet Metal Blade
13 Bayonet Timber Blade
2. Insert the battery into charging cradle. Both lights will illuminate
when properly connected & charging.
1. Plug charging jack into
charging cradle.
3. The green light only will
illuminate when the battery
reaches full charge.
