MAINTENANCE
DESCRIPTION OF SYMBOLS
Cleaning
1. We recommend that you clean the appliance immediately after you
use it.
2. Do not use any liquid cleaning agents or solutions to clean the tool.
Ensure that no water can get into the interior of the appliance.
Storage
Pull the mains plug out of the socket, switch off the tool and make
sure that it is secured in such a way that it cannot be started up again
by any unauthorised person.
Store the tool in a dry location which is not accessible to unauthorised
persons.
Supply Cords
The supply cord of this power tool cannot be replaced, and the power
tool shall be scrapped.
Note:
Ozito Industries will not be responsible for any damage or
injuries caused by the repair of the tool by an unauthorised person or
by mishandling of the tool.
WARNING!
BEFORE CLEANING THE TOOL OR
CARRYING OUT ANY MAINTENANCE PROCEDURE,
MAKE SURE THAT IT IS DISCONNECTED FROM
THE POWER SUPPLY TO PREVENT ACCIDENTAL
STARTING.
Double insulated
Warning
Regulatory Compliance Mark
(RCM)
V
Volts
Hz
W
Hertz
~
psi
L/min
Alternating Current
Watts
Pounds per square inch
Litres per minute
Read Instruction Manual
Power tools that are no longer usable should not be
disposed of with household waste but in an environmentally
friendly way. Please recycle where facilities exist. Check
with your local council authority for recycling advice.
Recycling packaging reduces the need for landfill and raw
materials. Reuse of recycled material decreases pollution in
the environment. Please recycle packaging where facilities
exist. Check with your local council authority for recycling
advice.
CARING FOR THE ENVIRONMENT
SPARE PARTS
Spare parts can be ordered from the Special Orders Desk
at your local Bunnings Warehouse.
For further information, or any parts not listed here, visit
www.ozito.com.au or contact Ozito Customer Service:
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: [email protected]
