1. Fit the required adaptor onto
the deflation port tightly.
2. Insert the adaptor into the
valve of the inflatable item.
3. Switch the inflator on.
WARNING!
ENSURE THE INFLATION PORT IS NOT
OBSTRUCTED, OTHERWISE THE UNIT COULD
OVERHEAT.
4. Once the item is suitably
deflated, switch the tool off
and then remove the adaptor
from the valve.
HVAP-240
4. DEFLATING ITEMS
5. TROUBLESHOOTING
Symptom
Possible Cause
Solution
The air pump
does not start
No power supply
Connect the power
cord to a 240V outlet
On/off switch not in the
on position
Push the on/off
switch to the on ‘I’
position
Nozzles
disconnect
when the pump
switches on
Loose inflation nozzle
Ensure that the
inflation nozzle is
pushed tightly onto
the air port of the tool
Pump is operating
but the inflatable
item is not
inflating/deflating
Some inflatable items
have a check valve
that require pinching or
unscrewing
Pinch or unscrew the
item’s check valve
while operating the
pump
Pump is
overheating
While inflating, the
deflation port is being
obstructed, restricting air
flow to the air pump
Ensure the deflation
port is free of any
obstructions
While deflating, the
inflation port is being
obstructed, restricting air
flow to the air pump
Ensure the inflation
port is free of any
obstructions
