WARNING!
Always ensure that the trimmer is switched off and the plug is
removed from the power point before making any adjustments
•
When not in use, the Hedge Trimmer should be stored in a dry, frost free location
not within the reach of children.
•
Keep ventilation slots of the Hedge Trimmer clean at all times and prevent any
foreign matter from entering.
•
If the enclosure of the Hedge Trimmer requires cleaning do not use solvents but a
moist cloth only.
•
There are no user serviceable parts in the Hedge Trimmer; if a fault is suspected or
the supply cord requires replacement, return the Trimmer to a power tool repairer.
•
The blade rail should be cleaned and treated with light machine oil or spray
lubricant (such as WD40, CRC 5.56 or RP7) after each use. When a job lasts for a
longer period of time it is recommended that the blade rail also be treated with
spray lubricant at regular intervals during operation.
Carbon brushes
When the carbon brushes wear out the tool will spark and/or
stop. Discontinue use as soon as this happens. They should
be replaced prior to recommencing use of the tool.
Carbon brushes are a wearing component of the tool and
therefore not covered under warranty. Continuing to use the
tool when carbon brushes need to be replaced may cause
permanent damage to the tool. Carbon brushes will wear out
after many uses but when the carbon brushes need to be
replaced take the tool to an electrician or a power tool repairer for a quick and low
cost replacement. Always replace both carbon brushes at the same time.
Note:
Ozito Industries will not be responsible for any damage or injuries caused by
the repair of the tool by an unauthorised person or by mishandling of the tool.
11
MAINTENANCE
!!
carbon brushes
Summary of Contents for HTE-360
Page 1: ......
