background image

MAINTENANCE

DESCRIPTION OF SYMBOLS

Cleaning

  The hose adaptor and mesh inlet filter must be inspected regularly, 

so as to avoid blockage and restriction in the water supply to the 
unit.

  Using the supplied cleaning 

needle, insert into the adjustable 
spray nozzle hole and move back 
and forth until debris is dislodged.

  We recommend that you clean the tool immediately after you use it.

  Keep the tool free of dirt and dust as much as possible. Wipe the 

equipment with a clean cloth.

  Clean the tool regularly with a cloth. Do not use cleaning agents 

or solvents; these may be aggressive to the plastic parts in the 
appliance.

  You must disconnect the hose and spraying tools from the pressure 

washer before cleaning. Do not clean the pressure washer with 
water.

Storage

Pull the mains plug out of the socket, switch off the tool and make 
sure that it is secured in such a way that it cannot be started up again 
by any unauthorised person.

The adjustable spray nozzle can be stored on the accessory slots on 
the back of the unit when not in use. Wind the water hose around the 
handle hook and the power cord around the cord hook to keep them 
tidy and out of the way.

Supply Cords

If replacement of the supply cord is necessary, this has to be done by 

a certified electrician in order to avoid a safety hazard.

Note: 

Ozito Industries will not be responsible for any damage or injuries 

caused by the repair of the tool by an unauthorised person or by mishandling 
of the tool.

WARNING! 

BEFORE CLEANING YOUR TOOL OR CARRYING 

OUT ANY MAINTENANCE PROCEDURE, MAKE SURE THAT IT 
IS DISCONNECTED FROM THE POWER SUPPLY TO PREVENT 
ACCIDENTAL STARTING.

Wear gloves

Wear eye protection

Ingress protection from water

Warning

Regulatory Compliance Mark
(RCM)

Machine not suitable for 
connection to the potable 
water mains

Warning! High pressure 
jets can be dangerous if 
not used properly. Do not 
direct the jet at persons, 
animals, live electrical 
equipment or the 
pressure washer itself.

Double insulated

V

Volts

Hz

W

Hertz

~

psi

IPX5

L/min

Alternating Current

Watts

Pounds per square inch

Litres per minute

MPa

Mega Pascals

Read Instruction Manual

90

Sound power level

Wear ear protection

Power tools that are no longer usable should not be 
disposed of with household waste but in an environmentally 
friendly way. Please recycle where facilities exist. Check 
with your local council authority for recycling advice.

Recycling packaging reduces the need for landfill and raw 

materials. Reuse of recycled material decreases pollution in 
the environment. Please recycle packaging where facilities 
exist. Check with your local council authority for recycling 
advice.

CARING FOR THE ENVIRONMENT

SPARE PARTS

Spare parts can be ordered from the Special Orders Desk 
at your local Bunnings Warehouse. 

For further information, or any parts not listed here, visit 

www.ozito.com.au or contact Ozito Customer Service: 

Australia 1800 069 486 

New Zealand 0508 069 486 

E-mail: [email protected]

Summary of Contents for HPW-2030









Reviews: